Car fuel gauge are not allowed
Riders: I purchased the car for some time, now has a small problem, though not affect the use, but also made me very depressed. The problem lies in the car's fuel gauge, it's absolute accuracy is doubtful. The first 1 / 2, the pointer down very slowly, but after a half later, I feel like the engine oil is generally in the drink, brush pointer fall down. Every time I would arrive at the pointer when the last white line to the fuel, $ 100 oil can sometimes added, and rose to the position of the pointer is not the same. Another time, fill the oil, the fuel gauge pointer is not the ceiling, how is this going?
Treatment advice: on the fuel gauge pointer is not the same rate of decline in the rate of this phenomenon, there may be design problems. Some models of the fuel gauge itself is not a linear manner in accordance with the design, the first half slow, half soon after this phenomenon should be more normal. Fuel gauge pointer bit unstable, may be the oil level sensor oil table problem.
If confirmed to fill the oil after the fuel gauge pointer does not reach the peak, should monitor the fuel gauge problem. These problems to the repair shop maintenance click on it.
Sudden auto-down power windows
Riders: My car is in the high-end models, four electric windows are standard equipment, have been extremely easy to use, especially the main driving down the side of a key design, eliminating the trouble of always holding down the control button, I had that car than the electric doors and windows much better. But sometimes things have advanced problems, now my main drive side power window whenever rise to the top, it will automatically drop a sudden, confused every time I close the window of time, but also carefully control it, the easy way into trouble , the control system will not be a problem then?
Treatment advice: General limousine in the design of power windows will be installed on a pinch function, you avoid the unexpected operation resulting in personal injury. The vehicle's use, if the door is lined with some objects inside the top box, to rise to this part of the window when the sensor will start anti-pinch function, so the windows down. In addition, sometimes at high speed the process, because the glass will cause the voltage smoothly along the track can not be increased, can lead to anti-pinch feature activated. In this case, the best to the service station about special adjustment, check for foreign objects impact windows down, and make adjustments.
Bumper Mifengbuyan
Riders: some time ago changeable weather, frequent rain, finally, God forbid, my car did not become a victim of water. Although the car did not sacrifice in the rain, but this stretch of water really brought me a lot of trouble. Just about finished the rain, the headlights of the car is a fine mist of water, you said that the mist can not rub the lamp in the more depressed ah! Question is the car is fog, you can use baking way to remove warm air, I do not know whether this approach also applies to baking headlights it?
Treatment advice: As the lights Mifengbuyan, cleaning, and when it rains water is likely to result, and when a larger temperature difference between inside and outside when the fog will form. This time it is best not to bake, because the lights are generally polymer materials, if the baking temperature is too high, it may cause the lights to soften the appearance of deformation, affecting the appearance and use.
In addition, the current lights are generally monolithic, transparent shade behind the stick also has a light body to protect the back, between the two high-temperature baking may result in bonding resin melt, increasing the lamp into the the possibility of water. of irradiation, will soon evaporate. If the lights frequent water phenomenon, you should check the lights to the service station body to see if the lights are not due to damage collisions, resulting in frequent water.
prev:Driving skills training to use the lights you know?(2011-07-06)
next:Auto lamp daily maintenance and common maintenance(2011-07-04)
Focus on customer service, that's why we get a good reputation.
Learn more>>