This replacement lamp is not high-tech work, but not an easy task, because the layout of various parts in the car varies, for the lights around the back of compact models for , leaving the user to replace the lights of the school based on this state space is not particularly skilled user best not to risk their own replacement, so as not to damage the car parts, more harm than good. If the lights back there is sufficient replacement space, you can be replaced by the following steps:

Tail replacement

1.Open the luggage compartment lid, cut off the vehicle power supply, clean trunk, leaving the space can be replaced.

2.Remove the dust back plate lights. Most lights are divided into two forms: light bulbs and lamps with integrated lamp and separate lamp style, and here the former, the latter see front headlight replacement.

3.to determine the need to replace the lamp, hold down the back of the rotation of the handle lights, to unscrew. Replacement on the new lights, pay attention to the lights of the model and color.

4.re-installed lights and dust-proof plate. In general, the tail of the disassembly work is relatively easy, a large work space, two relatively simple structure.

Headlight replacement

1.Open the engine hatch to observe the back of the headlight car parts layout, and if space is insufficient, then to the professional or "4S" shop to replace. Model to determine the car's headlights, headlight attention to the lower part of the outer glass lamp identification model.

2.Unscrew the lamp cover, note the different models because of the method will remove the lamp cover nuances.

3.Disconnect the hard line of the lamp with power, pull the hand when holding down the lights so as not to damage the attention.

4.Loosen the retaining ring holder can be lights out, then re-install the new bulb. Process re-installed the reverse order of removal, not repeat them here. Note Replace the dust cover be sure to Pa, to avoid headlights by rain and dust.

prev：Korean LED industry has great development(2011-08-10)

next：Install the auto led bulbs by yourself(2011-08-04)