Liu: I recently event of the car and the yearly check for half an hour, originally thought could smooth, but detection through yearly check procedure found during the headlight brightness didn't meet the requirements. So I had to spend a lot of time to 4S inn replacement bulbs, again to testing field adjust lighting Angle, spend the money hasn't much, but time is delayed the lot. For us the novice, there is nothing to confirm your lamp complies with the standards and smoothly through the yearly check?

Answer: automobile lamps, commonly known as the "headlamps", the main bearing the lighting, thus driving at night lights "motorized vehicle safety operation compliance with requirements of technical conditions" is an important content of the car yearly check. In fact as long as usually pay attention, completes the headlamps maintenance, can avoid encounter similar trouble.

And maintained regularly need oil changes as filter, headlamps bulb also need to be replaced periodically. Generally running 5 million kilometers or every two years or so, headlight brightness of bulb will be weakened, at best to 4S inn make a detection, if it has brightness, it is recommended that the shortage of replacement bulbs, recommend both sides and replacement, lest appear on both sides of the brightness unusual. Bulb is the most main components, lights its the performance will affect lighting effect, directly related to safety. So we should use high quality headlamps bulb to fully guarantee security. Therefore, on their own or is damaged modified headlight need to change, don't consider inferior light bulb.

Vehicle inspection, also examine whether correctly, lamp beam position right beam position makes vision more clearly, driving safer. Actually appear in lamp, do-it-yourself position migration can also quickly solve problems. First choose a dim environment, such as an underground parking lot or night, will on a wall headlights are parked with wall body, head of is, as far as possible apart 5, 6 meters; The second step, open the lamp, with opaque of thick cloth cover a lamp, adjust alone each headlamps. In order to guarantee the normal traffic lights beam position in the position, had better not let vehicles racing, can find a friend in driving seats; Third step, will shine in metope lamps with marker pen or scope center, and make a mark of chalk in vehicle-logo (headlights are center) position corresponding metope place also make a mark. Both sides were measured with central position lights mark, two distance should equal distance. If you happen to outside or inside the phenomenon, is partial vehicles should look at the instruction for use, with a screwdriver for subtle adjustment, make two headlight position symmetric; Fourth step, regulate the beam height, right lamp should be completely level is point-blank, left to rise high lights, about 10cm but don't adjustable too high, lest light point-blank opposite to car driver's eyes. And right headlight illuminate range can be to starboard some, in order to improve visibility on the right side of the vehicle.

prev：Currently there are three ways to upgrade headlights(2011-05-12)

next：Car LED Replacement Bulbs: Latest Technology in Automotive Lighting(2011-05-10)