1. Locate an area along the side of the vehicle to mount the LED lights.
2. Clean and prep the area. Make sure it is free of dirt, oil, and water.
3. Once area is clean, peel the protective cover off the 3M tape and stick the LED's in the desired location.
4. When running the wires you want to make sure they are tucked up and out of the way so the wires will not drag on the ground as you drive.
5. Run the wires up into the engine bay area and locate the power wires for the parking lights. Use a basic 12v test light to identify what wires are the running light wires.
6. Hook the transparent / white wire to the positive (+) driving light wire and the other one wire to a good metal ground free of paint.
7. Now turn on the parking lights and check for proper functions. If it does not turn on, check your groud and power connections.
8. Make sure to check for any loose wires and make sure the wires will not interfere with and moving or mechanical parts on the vehicle.